Eight drawings from your DWG or DXF

Fastiture reads the floor plans in the drawing and prepares the drawing set: floor plan, usable areas and dimensions, plus an elevation and a section generated from the floor plans, with heights you review, and the parcel's location on the Catastro map. You export it as PDF and, except for the location drawing, as editable DXF.

How it works

  1. 01

    You upload the DWG or DXF

    You start from the drawing you already work with in the studio: 2D floor plans are enough, it does not need to include elevations or sections. With the cadastral reference, Fastiture places the parcel on the Catastro map.

  2. 02

    Fastiture reads the geometry

    It recognises walls, openings and rooms working on the lines of the drawing: the same file always gives the same result.

  3. 03

    You review and export

    You go through the drawings, correct whatever needs it and export them as PDF and as editable DXF to keep working in your CAD program.

The eight drawings

All of them come from the same source drawing and are numbered P01 to P08.

  1. P01

    Location

    Location in the urban context and site plan of the parcel, on the Catastro map, with the cadastral reference.

  2. P02

    Floor plan

    Each floor, with walls, doors and windows, and the room names written in the drawing.

  3. P03

    Areas

    Usable floor area of each room, with the total per floor and for the building.

  4. P04

    Dimensioned plan

    Each floor with exterior dimension chains, partial and overall, and the interior dimensions of each room.

  5. P05

    Elevations

    Elevation of one façade, the entrance one unless you choose another, generated from the floor plans with standard heights you can correct.

  6. P06

    Dimensioned elevations

    The same elevation with its height dimensions.

  7. P07

    Section

    Vertical section along the cut line Fastiture proposes, which you can change.

  8. P08

    Dimensioned section

    The same section with its height dimensions.

Formats

Input: DWG or DXF. Output: PDF and, except for the location drawing, editable DXF to keep working in your CAD program.

What it does and what it does not

Fastiture prepares the graphic documentation from your floor plans; reviewing and signing it is up to you. It does not check regulations or produce the written report, quantities or cost estimate.

Try it with your drawing, no sign-up

Upload a drawing in DXF or DWG and work with it in Fastiture: you will see the floors and rooms detected and how the drawing set turns out. No account needed.

Try it with my drawing

The demo takes one drawing. Exporting to PDF or DXF, consulting the Catastro for the location drawing and keeping the project require an account. The drawing and the changes made in the demo are deleted automatically once 24 hours have passed. A DWG saved with AutoCAD Architecture cannot be read: save it first as a standard DWG or DXF.